Generator load worksheet fields
Generator running-load and starting-kVA record fields for Australian backup-power worksheets.
Generator load fields for backup sizing
Show generator load record fields without selecting a generator set, transfer arrangement or final backup-power design.
| Field | Purpose | Typical source | Boundary |
|---|---|---|---|
| Running load | Records steady load included in generator sizing. | Load schedule or equipment data | Connected load and required backup load may differ. |
| Starting load | Captures motor or equipment starting contribution. | Motor calculator, product data or starter setting | Starting method can change the apparent power materially. |
| Largest step load | Shows the load change the generator must tolerate. | Sequence or controls note | Step loading needs generator product review. |
| Voltage and phase | Keeps supply arrangement tied to the kVA record. | Project or generator data | Single-phase and three-phase values must not be mixed. |
| Transfer or backup scope | Shows which loads are included during backup operation. | Switchboard or transfer design record | This table does not select transfer equipment. |
- Use this table to make generator sizing inputs traceable.
- Generator selection needs manufacturer data, transfer design, fuel/runtime and competent review.
Before generator records feed sizing review
Capture running load, starting behaviour and duty assumptions before reviewing generator kVA or backup capacity.
| Item | Value |
|---|---|
| Purpose | Show generator load record fields without selecting a generator set, transfer arrangement or final backup-power design. |
| How to use the source | Field table only; running-load and starting-kVA arithmetic lives on the generator calculator. |
| Standards and project context | AS/NZS 3010, AS/NZS 3000 and manufacturer context noted for project review; verify current sources and product data. |
| Where judgement is still needed | Use this table for lookup, labelling or worksheet context; do not treat it as a project-specific calculation result. |
| Before relying on it | Confirm current standards, local authority requirements, DNSP conditions, project documents and manufacturer data before relying on a decision. |
Project record basis for generator load fields
Keep the project or equipment record, checked date and Australian site scope visible beside each load field.
| Item | Value |
|---|---|
| Source | AUWiring generator load and starting-kVA calculator field model and Australian backup-power record practice. |
| Source type | Project or product record model |
| Derivation basis | AUWiring field table for generator worksheets; generator-set ratings, transfer design and manufacturer requirements are not reproduced. |
| Last checked | 2026-07-13 |
| Review interval | Annual or when generator calculator fields, backup-power practice, standards context or manufacturer guidance changes. |
| Review trigger | Calculator field change, standards update, generator product change, transfer arrangement change or project feedback. |
| Version used | R39-2026-07-13 |
| Australian application | Australia; generator product data, transfer equipment, fuel/runtime requirements and project review govern final decisions. |